Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Ethernet problem

  1. #1
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Thumbs up Ethernet problem

    I have installed RHEL5.1 in my home pc ..............Intel R 2GHZ with 2MB cache,

    by defaults am not getting ethernet drivers for this some people forceed me to buy the Ethernet Know i have buy the pci card ................?

    like this i have seen till know number off problems ..............

  2. #2
    Senior Member
    Join Date
    Jun 2007
    Location
    Hyderabad, AP, India
    Posts
    806
    Thanks
    44
    Thanked 55 Times in 48 Posts
    Rep Power
    13

    Default

    I dont think linux will not have drivers for your hw..
    try to execute the following commands and let us know
    may be the interface is down..
    use
    mii-tool
    and give us output of this..
    system-config-network

    etc.. and let us know..
    Thanks,
    Surendra Kumar Anne
    Linux: Fast, friendly, flexible and .... free!
    Support Open source.
    http://www.linuxnix.com

  3. #3
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Thumbs up

    Yes .........i may be drivers not there ................


    i tried the above commands .................am not getting any display with those command,

    As u said i may be drivers not got installed ........................

    My question is :
    Is there any drivers for all the hardware i mean i have tried for the drivers i didn't gt the rpm for this problem ..........


    what i ma doing is if linux wont detect Ethernet means i suggesting to my friends that buy the pci card, i know that i am giving wrong suggestion ........

    If any solution is there let me know friends.........

  4. #4
    Senior Member
    Join Date
    Jun 2007
    Location
    Hyderabad, AP, India
    Posts
    806
    Thanks
    44
    Thanked 55 Times in 48 Posts
    Rep Power
    13

    Default

    No need to suggest a PCI card just ask them to execute following commands
    kudzu
    This command will find new hardware/hardware with no drivers and try to configure it..
    what about the two commands which we given?
    Thanks,
    Surendra Kumar Anne
    Linux: Fast, friendly, flexible and .... free!
    Support Open source.
    http://www.linuxnix.com

  5. #5
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default

    I have tried kudzu also but it not getting detect the ethernet .............

    system-config-network :with these command it is not showing the inbuilt eth it is showing the pci card
    mii-tool : this command too showing pci card not inbuilt


    TQ

  6. #6
    Senior Member
    Join Date
    Jun 2007
    Location
    Hyderabad, AP, India
    Posts
    806
    Thanks
    44
    Thanked 55 Times in 48 Posts
    Rep Power
    13

    Default

    try to execute below command and check whether your hardware is found or not
    #dmidecode
    Thanks,
    Surendra Kumar Anne
    Linux: Fast, friendly, flexible and .... free!
    Support Open source.
    http://www.linuxnix.com

  7. #7
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default This is the output for :dmidecode

    BIOS Information
    Vendor: American Megatrends Inc.
    Version: V3.0B1
    Release Date: 06/16/2008
    Address: 0xF0000
    Runtime Size: 64 kB
    ROM Size: 512 kB
    Characteristics:
    ISA is supported
    PCI is supported
    PNP is supported
    APM is supported
    BIOS is upgradeable
    BIOS shadowing is allowed
    ESCD support is available
    Boot from CD is supported
    Selectable boot is supported
    BIOS ROM is socketed
    EDD is supported
    5.25"/1.2 MB floppy services are supported (int 13h)
    3.5"/720 KB floppy services are supported (int 13h)
    3.5"/2.88 MB floppy services are supported (int 13h)
    Print screen service is supported (int 5h)
    8042 keyboard services are supported (int 9h)
    Serial services are supported (int 14h)
    Printer services are supported (int 17h)
    CGA/mono video services are supported (int 10h)
    ACPI is supported
    USB legacy is supported
    LS-120 boot is supported
    ATAPI Zip drive boot is supported
    BIOS boot specification is supported
    Targeted content distribution is supported
    BIOS Revision: 8.15

    Handle 0x0001, DMI type 1, 27 bytes.
    System Information
    Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
    Product Name: Z3-7529
    Version: 1.0
    Serial Number: To Be Filled By O.E.M.
    UUID: 00000000-0000-0000-0000-001D92F3532E
    Wake-up Type: Power Switch
    SKU Number: To Be Filled By O.E.M.
    Family: To Be Filled By O.E.M.

    Handle 0x0002, DMI type 2, 15 bytes.
    Base Board Information
    Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
    Product Name: Z3-7529
    Version: 1.0
    Serial Number: To be filled by O.E.M.
    Asset Tag: To Be Filled By O.E.M.
    Features:
    Board is a hosting board
    Board is replaceable
    Location In Chassis: To Be Filled By O.E.M.
    Chassis Handle: 0x0003
    Type: Motherboard
    Contained Object Handles: 0

    Handle 0x0003, DMI type 3, 21 bytes.
    Chassis Information
    Manufacturer: MICRO-STAR INTERNATIONAL CO.,LTD
    Type: Desktop
    Lock: Not Present
    Version: 1.0
    Serial Number: To Be Filled By O.E.M.
    Asset Tag: To Be Filled By O.E.M.
    Boot-up State: Safe
    Power Supply State: Safe
    Thermal State: Safe
    Security Status: None
    OEM Information: 0x00000000
    Heigth: Unspecified
    Number Of Power Cords: 1
    Contained Elements: 0

    Handle 0x0004, DMI type 4, 40 bytes.
    Processor Information
    Socket Designation: CPU 1
    Type: Central Processor
    Family: Unknown
    Manufacturer: Intel
    ID: FD 06 00 00 FF FB EB BF
    Version: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
    Voltage: 1.3 V
    External Clock: 200 MHz
    Max Speed: 2000 MHz
    Current Speed: 2000 MHz
    Status: Populated, Enabled
    Upgrade: Other
    L1 Cache Handle: 0x0005
    L2 Cache Handle: 0x0006
    L3 Cache Handle: 0x0007
    Serial Number: To Be Filled By O.E.M.
    Asset Tag: To Be Filled By O.E.M.
    Part Number: To Be Filled By O.E.M.

    Handle 0x0005, DMI type 7, 19 bytes.
    Cache Information
    Socket Designation: L1-Cache
    Configuration: Enabled, Not Socketed, Level 1
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 64 KB
    Maximum Size: 64 KB
    Supported SRAM Types:
    Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Parity
    System Type: Data
    Associativity: 8-way Set-associative

    Handle 0x0006, DMI type 7, 19 bytes.
    Cache Information
    Socket Designation: L2-Cache
    Configuration: Enabled, Not Socketed, Level 2
    Operational Mode: Write Back
    Location: Internal
    Installed Size: 1024 KB
    Maximum Size: 1024 KB
    Supported SRAM Types:
    Other
    Installed SRAM Type: Other
    Speed: Unknown
    Error Correction Type: Single-bit ECC
    System Type: Unified
    Associativity: 4-way Set-associative

    Handle 0x0007, DMI type 7, 19 bytes.
    Cache Information
    Socket Designation: L3-Cache
    Configuration: Disabled, Not Socketed, Level 3
    Operational Mode: Unknown
    Location: Internal
    Installed Size: 0 KB
    Maximum Size: 0 KB
    Supported SRAM Types:
    Unknown
    Installed SRAM Type: Unknown
    Speed: Unknown
    Error Correction Type: Unknown
    System Type: Unknown
    Associativity: Unknown

    Handle 0x0008, DMI type 5, 20 bytes.
    Memory Controller Information
    Error Detecting Method: 64-bit ECC
    Error Correcting Capabilities:
    None
    Supported Interleave: One-way Interleave
    Current Interleave: One-way Interleave
    Maximum Memory Module Size: 4096 MB
    Maximum Total Memory Size: 8192 MB
    Supported Speeds:
    Other
    Supported Memory Types:
    DIMM
    SDRAM
    Memory Module Voltage: 3.3 V
    Associated Memory Slots: 2
    0x0009
    0x000A
    Enabled Error Correcting Capabilities:
    None

    Handle 0x0009, DMI type 6, 12 bytes.
    Memory Module Information
    Socket Designation: DIMM1
    Bank Connections: 0 1
    Current Speed: Unknown
    Type: DIMM SDRAM
    Installed Size: Not Installed
    Enabled Size: Not Installed
    Error Status: OK

    Handle 0x000A, DMI type 6, 12 bytes.
    Memory Module Information
    Socket Designation: DIMM2
    Bank Connections: 4 5
    Current Speed: Unknown
    Type: DIMM SDRAM
    Installed Size: 1024 MB (Double-bank Connection)
    Enabled Size: 1024 MB (Double-bank Connection)
    Error Status: OK

    Handle 0x000B, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J1A1
    Internal Connector Type: None
    External Reference Designator: PS2Mouse
    External Connector Type: PS/2
    Port Type: Mouse Port

    Handle 0x000C, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J1A1
    Internal Connector Type: None
    External Reference Designator: Keyboard
    External Connector Type: PS/2
    Port Type: Keyboard Port

    Handle 0x000D, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J2A2
    Internal Connector Type: None
    External Reference Designator: USB1
    External Connector Type: Access Bus (USB)
    Port Type: USB

    Handle 0x000E, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J2A2
    Internal Connector Type: None
    External Reference Designator: USB2
    External Connector Type: Access Bus (USB)
    Port Type: USB

  8. #8
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Next to that

    Handle 0x000F, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J4A1
    Internal Connector Type: None
    External Reference Designator: LPT 1
    External Connector Type: DB-25 male
    Port Type: Parallel Port ECP/EPP

    Handle 0x0010, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J2A1
    Internal Connector Type: None
    External Reference Designator: COM A
    External Connector Type: DB-9 male
    Port Type: Serial Port 16550A Compatible

    Handle 0x0011, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6A1
    Internal Connector Type: None
    External Reference Designator: Audio Mic In
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0012, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6A1
    Internal Connector Type: None
    External Reference Designator: Audio Line In
    External Connector Type: Mini Jack (headphones)
    Port Type: Audio Port

    Handle 0x0013, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6B1 - AUX IN
    Internal Connector Type: On Board Sound Input From CD-ROM
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Audio Port

    Handle 0x0014, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6B2 - CDIN
    Internal Connector Type: On Board Sound Input From CD-ROM
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Audio Port

    Handle 0x0015, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6J2 - PRI IDE
    Internal Connector Type: On Board IDE
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0016, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6J1 - SEC IDE
    Internal Connector Type: On Board IDE
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0017, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J4J1 - FLOPPY
    Internal Connector Type: On Board Floppy
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0018, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J9H1 - FRONT PNL
    Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0019, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J1B1 - CHASSIS REAR FAN
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001A, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J2F1 - CPU FAN
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001B, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J8B4 - FRONT FAN
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001C, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J9G2 - FNT USB
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001D, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J6C3 - FP AUD
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001E, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J9G1 - CONFIG
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x001F, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J8C1 - SCSI LED
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0020, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J9J2 - INTRUDER
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0021, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J9G4 - ITP
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0022, DMI type 8, 9 bytes.
    Port Connector Information
    Internal Reference Designator: J2H1 - MAIN POWER
    Internal Connector Type: Other
    External Reference Designator: Not Specified
    External Connector Type: None
    Port Type: Other

    Handle 0x0023, DMI type 9, 13 bytes.
    System Slot Information
    Designation: PCI1
    Type: 32-bit PCI
    Current Usage: In Use
    Length: Short
    ID: 1
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x0024, DMI type 9, 13 bytes.
    System Slot Information
    Designation: PCI2
    Type: 32-bit PCI
    Current Usage: Available
    Length: Short
    ID: 2
    Characteristics:
    3.3 V is provided
    Opening is shared
    PME signal is supported

    Handle 0x0025, DMI type 10, 6 bytes.
    On Board Device Information
    Type: Video
    Status: Enabled
    Description: To Be Filled By O.E.M.

    Handle 0x0026, DMI type 13, 22 bytes.
    BIOS Language Information
    Installable Languages: 1
    en|US|iso8859-1
    Currently Installed Language: en|US|iso8859-1

    Handle 0x0027, DMI type 16, 15 bytes.
    Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: None
    Maximum Capacity: 4 GB
    Error Information Handle: Not Provided
    Number Of Devices: 2

    Handle 0x0028, DMI type 19, 15 bytes.
    Memory Array Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x0003FFFFFFF
    Range Size: 1 GB
    Physical Array Handle: 0x0027
    Partition Width: 0

    Handle 0x0029, DMI type 17, 27 bytes.
    Memory Device
    Array Handle: 0x0027
    Error Information Handle: Not Provided
    Total Width: Unknown
    Data Width: Unknown
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM1
    Bank Locator: BANK0
    Type: Unknown
    Type Detail: Unknown
    Speed: Unknown
    Manufacturer: Manufacturer0
    Serial Number: SerNum0
    Asset Tag: AssetTagNum0
    Part Number: PartNum0

    Handle 0x002A, DMI type 20, 19 bytes.
    Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x000000003FF
    Range Size: 1 kB
    Physical Device Handle: 0x0029
    Memory Array Mapped Address Handle: 0x0028
    Partition Row Position: 1
    Interleaved Data Depth: 1

    Handle 0x002B, DMI type 17, 27 bytes.
    Memory Device
    Array Handle: 0x0027
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM2
    Bank Locator: BANK1
    Type: SDRAM
    Type Detail: Synchronous
    Speed: Unknown
    Manufacturer: Manufacturer1
    Serial Number: SerNum1
    Asset Tag: AssetTagNum1
    Part Number: PartNum1

    Handle 0x002C, DMI type 20, 19 bytes.
    Memory Device Mapped Address
    Starting Address: 0x00000000000
    Ending Address: 0x000000003FF
    Range Size: 1 kB
    Physical Device Handle: 0x002B
    Memory Array Mapped Address Handle: 0x0028
    Partition Row Position: 1
    Interleaved Data Depth: 1

    Handle 0x002D, DMI type 32, 20 bytes.
    System Boot Information
    Status: No errors detected

    Handle 0x002E, DMI type 127, 4 bytes.
    End Of Table

  9. #9
    Member
    Join Date
    Dec 2009
    Location
    HYD
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default

    the command was excellent Thank U very much ,,,,,,,,,,,,,,,,,,,,,,,,


    Unfortunatly that still the ethernet not detected ...............





    TQ Vmuch

  10. #10
    Senior Member
    Join Date
    Jun 2007
    Location
    Hyderabad, AP, India
    Posts
    806
    Thanks
    44
    Thanked 55 Times in 48 Posts
    Rep Power
    13

    Default

    hi I didnt find much info yar..

    wait for some time.. may be nixcraft Linux experts will resolve your issue
    Thanks,
    Surendra Kumar Anne
    Linux: Fast, friendly, flexible and .... free!
    Support Open source.
    http://www.linuxnix.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to connect two LINUX installed system using a Ethernet
    By narasimha.reddygnv in forum Linux software
    Replies: 10
    Last Post: 9th April 2013, 02:11 AM
  2. realtek rtl8139/810x family fast ethernet Nic
    By rkbs in forum Linux hardware
    Replies: 0
    Last Post: 23rd December 2009, 11:28 PM
  3. Kubuntu / Ubuntu Lan Ethernet card bonding Tutorial
    By alex.inoa in forum Networking, Firewalls and Security
    Replies: 8
    Last Post: 24th July 2008, 02:27 PM
  4. ethernet card error netstat
    By in forum Linux software
    Replies: 1
    Last Post: 30th January 2006, 05:25 PM
  5. iptables rules for three ethernet
    By brijeshchougule in forum Linux software
    Replies: 2
    Last Post: 16th June 2005, 03:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •