I am not sure if i writing in the rigth place...
I am a student and i have found this forum while i was looking documentation about MRTG for a subject in the university..
I found a manual and when I was trying to install it, but i don't manage to do it
when i write: snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex
i get no answer.. I did what the manual told me to do with the snmpd.conf but i still having no response..
If i do
snmpwalk -v 1 -c public localhost
i get
SNMPv2-MIB::sysDescr.0 = STRING: Linux localhost.localdomain 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:54:20 EDT 2006 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (967349) 2:41:13.49
SNMPv2-MIB::sysContact.0 = STRING: Root (configure /etc/snmp/snmp.local.conf)
SNMPv2-MIB::sysName.0 = STRING: localhost.localdomain
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (edit /etc/snmp/snmpd.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (29) 0:00:00.29
SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.3 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.5 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.6 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.7 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.6 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.7 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.8 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (2 0:00:00.28
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (2 0:00:00.28
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (2 0:00:00.28
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (2 0:00:00.28
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (2 0:00:00.28
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (29) 0:00:00.29
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (29) 0:00:00.29
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (29) 0:00:00.29
HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (1259915) 3:29:59.15
End of MIB

any porposal would be wellcome....

Thank you very much in advance

Pili