Dear all,


I have installed openldap in my system (CentOS 5.9)..


While adding an user in .ldif file and entered the password it is showing as the error Enter LDAP Password:
ldap_bind: Invalid credentials (49)
.



please suggest....




#vim /etc/openldap/slap.conf

database bdb
suffix "dc=unotechtest,dc=com"
rootdn "cn=admin,dc=unotechtest,dc=com"
# Cleartext passwords, especially for the rootdn, should
# be avoided. See slappasswd(8) and slapd.conf(5) for details.
# Use of strong authentication encouraged.
# rootpw secret
rootpw {SSHA}UpKdzwM4uocKMefZjJ+cnu/+91W3xAeL


[root@localhost openldap]# ldapsearch -x -b 'dc=unotechtest,dc=com' '(objectclass=*)'
# extended LDIF
#
# LDAPv3
# base <dc=unotechtest,dc=com> with scope subtree
# filter: (objectclass=*)
# requesting: ALL
#

# search result
search: 2
result: 32 No such object

# numResponses: 1

Hai to all,

I have installed Nginx , i am not able to see /etc/nginx/conf.d/default.conf but i can see /etc/nginx/nginx.conf..

Note : There was no error came during installation..

use of free command in linux.

how to find server name of linux box

main difference between df and du.

how to find the process other than root user in linux.

I need to get expect/tcl loaded on a Linux machine I have access to.
Im not an admin so Im not sure what to ask for.
Here is what we are running ... a Redhat clone from what I understand.



CentOS release 6.4 (Final)
LSB_VERSION=base-4.0-amd64:base-4.0-noarch:core-4.0-amd64:core-4.0-noarch:graphics-4.0-amd64:graphics-4.0-noarchrinting-4.0-amd64rinting-4.0-noarch

A step by step procedure would be very helpful but any help would be greatly appreciated.

Thanks

Hi,

In our organization we have planned to lift and shift some Linux servers from one location to another location. Its all SAN connected and volume group created . The SAN team will do the replication from their side. Some servers are having multipath and others are having powerpath configured .I required the steps to be followed at the time of server disconnection and reconnection. Please advice ASAP.

Hi,

I patched my RHEL 5.8 using yum update and then followed by updating vmware tools on my Virtual machine ( hosted on Vpshere), This is Oracle Database server.

After this when i rebooted - I saw may failed in the console.....with read only filesystem...........cat /etc/fstab was empty.......i went to single user mode and rewrite the /etc/fstab file ( same as another server) and server came up

What i am looking here::

Now, What are the things i should look for to find the cause, which caused /etc/fstab empty ( During my patching process i never touched this file anytime).....what are the logs which i can look to find the cause...

Hi,

we need to setup vnc server in network to access other mixture of servers ( windows / linux gui. ).We also have a requirement to record terminal sessions of logged users in vnc server and accessing other servers.

while accessing windows server from vnc server, how to watch activity? I heard about vnc reflactor . but there is no document or some url to understand it.

Does anyone did it ? or any other way to do it?

Thanks,
ROcky

Forgive me if this has been asked before, but I'm not sure how I would search for this. I have a specific application running on a super old Fedora 7 Moonshine box. This box cannot be upgraded or updated as previous attempts in a dev/test capacity have shown it will render the application unusable. Plans are being made to rewrite the application so it can be brought into this millennium. Being new to Linux I've been tasked with backing up the server and need to install ncftp as well as gnutar to get the system and mysql backed up over FTP. I absolutely cannot have the OS or mysql or anything accidentally updated to newer revisions as this will corrupt everything.

So my question is, if I run:
yum install ncftp and yum install gnutar

...won't the yum installer look for the latest versions of the ncftp and gnutar programs, install all updates and everything before installing the application?

I don't know how to compile anything myself, so what should/can I do here?

I Have configured the Vnc server on RHEL 5 and want to connect to it from Linux Mint.Everything is fine but i am not getting RHEL 5 GUI in Linux Mint i.e. I am only getting terminal.

server is at 32 bit architecture while vnc viewer is at 64 bit architecture is it because of different architecture or different OS?

Folks,

I am facing a strange issue in enabling quotas in RHEL 6. Please refer the below snippet for the error message,

quotacheck: Skipping XYZ:/nfsdata/ [/var/EQ_Finance/home]
quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.

Here, XYZ is the nfs server name.

/etc/fstab (My file)

/dev/VolGroup00/LogVol01 / ext4 defaults 1 1
UUID=f5117758-07e4-404d-8e6a-b049ea9087b6 /boot ext4 defaults 1 2
/dev/mapper/VolGroup00-LogVol00 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0


####NFS
XYZ:/nfsdata /var/EQ_Finance/home nfs rw,hard,intr,usrquota,grpquota,rsize=16384,wsize=1 6384,wsize=16384 0 0

Please do the needful.

Thanks!

Hi,everyone:),i am glad that you could come to this Thread.
Recent days,i want to make a program which writtened by c language.The program just like top command that detection cpu's utilization.And i don't know how write it.
The hardest part is that detection cpu's utilization function.And how to write it?
Thanks.

Hello All,

I am a telecommunications engineer who has run into a network trouble when using a communications system simulator on CentOS.

Details of my CentOS server:

The simulator runs on CentOS 5.5 on VMware. I've setup 2 NICs -

- eth0 (public) with IP address 148.147.134.XXX and gateway 148.147.134.1. This is connected to my corporate LAN.

- eth 1 (private) with IP address 10.30.30.2.

eth1 has 8000 aliases - eth1:1 to eth1:8000 with IP addresses 10.30.31.1 to 10.30.62.64 respectively.

Each of the eth1 aliases will emulate a virtual phone and are required to register/communicate with a Communications Server which is 148.147.143.XXX. This communication will be over a corporate LAN.

- NOTE: The corporate LAN (148.147.XXX.XXX) does not have a route to 10.30.XXX.XXX and this cannot be done owing to network policies and security.
- NOTE: No configuration changes are possible on the Communications Server (148.147.143.xxx).


MyNetwork.JPG

My current routing table -

[root@tartslinux ~]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.30.30.0 * 255.255.255.0 U 0 0 0 eth1
148.147.134.0 * 255.255.255.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1
default 148.147.134.1 0.0.0.0 UG 0 0 0 eth0


IP Forwarding is enabled (net.ipv4.ip_forward = 1 under /etc/sysctl.conf)

Problem:
I am unable to establish two way routing between the virtual phones /eth1 aliases (10.30.31.XXX - 10.30.62.XXX) and the communication server (148.147.143.XXX).

Is it possible to get this working by using IP forwarding and iptables/NAT or any other configuration on the CentOS server? Please remember, I cannot make any changes to the 148.147.XXX.XXX network or the communication server.

If you see a solution, can you please help me with the commands?


Thank you
Suresh

Attached Images

• MyNetwork.JPG (34.8 KB)
• MyNetwork.JPG (27.5 KB)