Dear All.

I have configured Bonding on RHEL 4.0, it is working fine my problem is that before bonding my eth0 speed was 1000GB but after doing bonding my eth0 speed is 100MB so how do I change my eth0 speed.

If I give command mii-tool I get the output like this.

eth0: negotiated 100baseTx-FD, link ok
eth1: negotiated 100baseTx-FD, link ok

But if I give the command ethtool eth0 I get the output
[root@~]# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: yes

[i]Which one is correct and how do I change the speed.

Pls help[/i]Regards.
Puppen

__________________
someone somewhere is made for you.
LOVE is Journey not a destination.
ALL I want is EVERYTHING.